Wavlink Router Login
Wavlink provides a wide array of networking devices, including routers, WiFi extenders, and mesh systems. Accessing their setup interface (often via wifi.wavlink.com or an IP) is key to configuration.
How to Login to Wavlink Router
Accessing your Wavlink device's settings allows configuration whether it's a router, extender, or mesh node. Wavlink uses several methods for login access.
First, connect your computer or phone to the Wavlink device's network. If setting up a new device, connect to its default WiFi network name (SSID) which often includes 'WAVLINK'. For existing setups, connect to your configured network.
Open your web browser. Wavlink commonly uses setup URLs: try http://wifi.wavlink.com or http://ap.setup first. These are local hostnames that should redirect to the device's interface.
If the URLs don't work, use the default IP address. The most common IP for Wavlink devices is 192.168.10.1. Enter this into the browser's address bar.
At the login screen, you'll typically be asked for a password. The default password for most Wavlink devices is admin. Often, no username is required, or if prompted, the username might also be 'admin'. Check your specific model's manual if 'admin' doesn't work.
- Connect your device (computer/phone) to the Wavlink device's network (WiFi or Ethernet). For setup, connect to its default WiFi (e.g., WAVLINK_N, WAVLINK_AC).
- Open a web browser.
- Try entering 'http://wifi.wavlink.com' or 'http://ap.setup'.
- If URLs fail, use the default IP address, commonly 'http://192.168.10.1'.
- Enter the default password, which is usually 'admin'. (Username might not be required).
- Click 'Login' or 'Sign In'.
Default IPs, username and password for Wavlink
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Wavlink | 192.168.10.1 | admin | admin | 85% |
| Wavlink | wavlink.com | admin | admin | 85% |
| Wavlink | wifi.wavlink.com | admin | admin | 85% |
Popular Router Models using Wavlink
| Model | IP | Username | Password |
|---|---|---|---|
| AC1200 (WL-WN530H4) | 192.168.10.1 | admin | admin |
| Quantum D4G (WL-WN572HG3) | 192.168.10.1 | admin | admin |
Troubleshooting Issues with Wavlink Router
Can't access wifi.wavlink.com or log into your Wavlink device? Try these steps:
- Check Connection: Ensure you are connected to the Wavlink device's *own* network, especially during setup.
- URLs vs IP: If wifi.wavlink.com or ap.setup fail, use the IP address '192.168.10.1' directly.
- Correct Address Entry: No typos? Use 'http://' prefix if needed. Don't add '.com' to the local URLs.
- Password Check: Use 'admin' as the password. Case-sensitive? Try leaving username blank or use 'admin'.
- Browser Issues: Clear cache/cookies, try an incognito/private window, or a different browser.
- Device Reboot: Power cycle the Wavlink device. Unplug, wait 30 seconds, plug back in.
- Factory Reset: Locate the reset button/pinhole. Press and hold for 10-15 seconds until lights indicate a reset. This restores defaults (IP 192.168.10.1, password 'admin', default WiFi name) and erases all settings.
- IP Conflict: Rarely, 192.168.10.1 might conflict with another device. Temporarily disconnect other devices if needed.
- Manual/Support: Consult your specific Wavlink model's manual or the Wavlink support website.
Wavlink Router setup
After logging into the Wavlink interface:
- Run Setup Wizard: Most Wavlink devices offer a wizard for initial configuration (Router mode, AP mode, Repeater mode). Follow the prompts.
- Change Admin Password: Crucial for security. Find 'Administration', 'System', or 'Password' settings and change the default 'admin' password.
- Configure Operating Mode: Select the desired mode (Router, AP, Repeater/Extender) based on your needs.
- Internet Setup (Router Mode): Configure WAN settings (DHCP, PPPoE, Static IP) as per your ISP.
- Wireless Settings: Set your WiFi network name(s) (SSID) and strong WPA2/WPA3 passwords. Configure 2.4GHz/5GHz bands.
- Connect to Host WiFi (Repeater Mode): Scan and connect to your main router's WiFi network, entering its password.
- Firmware Update: Check for firmware updates under 'System' or 'Management' tools. Download from Wavlink support if needed.
- Save Settings: Apply and save configuration changes. A reboot is often required.
Popular IPs for Wavlink
192.168.10.1
Access login details and setup guides for 192.168.10.1 WiFi routers
wavlink.com
Access login details and setup guides for wavlink.com WiFi routers
wifi.wavlink.com
Access login details and setup guides for wifi.wavlink.com WiFi routers
Frequently Asked Questions about Wavlink
What is Wavlink?
Wavlink produces networking devices. Login refers to accessing their web interface via wifi.wavlink.com, ap.setup, or IP 192.168.10.1 to configure them.
How to change Wavlink's WiFi Password or SSID?
Log in. Go to 'Administration' or 'System Settings' to change the admin password (default 'admin'). Go to 'Wireless Settings' to change the WiFi password(s).
What if I forget the Wavlink password?
Perform a factory reset using the reset button on the device. This restores the default password 'admin' and IP 192.168.10.1.
Can I change Wavlink to another IP?
The device's LAN IP (192.168.10.1) can usually be changed in 'LAN Settings' or 'Network Setup'.
How to Protect Your WiFi Network Using Wavlink?
Change the default 'admin' password. Use strong WPA2/WPA3 passwords for WiFi. Keep firmware updated.
How to reset your Wavlink login password?
Factory reset erases all custom settings (mode, passwords, network configs) and restores factory defaults (IP, 'admin' pass).
What are the most common default logins for Wavlink?
Password is typically 'admin'. Username might be blank or also 'admin'.
What is the most common default username for Wavlink?
Often blank or 'admin'.
What is the default password for Wavlink?
admin
Advanced Wavlink Router Settings
Wavlink devices often pack numerous features depending on the model:
Multiple Operating Modes
Flexibility to function as a Router, Access Point (AP), Repeater/Extender, WISP, or part of a Mesh system.
TouchLink Sensor (on some models)
Allows guests to connect to a guest WiFi network by simply touching the sensor on the device.
Guest Network
Create isolated WiFi networks for visitors.
Beamforming & MU-MIMO
Technologies to improve WiFi performance, range, and handle multiple devices simultaneously (on supported models).
QoS (Quality of Service)
Prioritize bandwidth for specific applications or devices.
Parental Controls / Access Control
Basic filtering or scheduling options.
USB Ports (on some models)
May offer USB ports for basic file sharing (Samba/FTP) or potentially printer sharing.
WPS Button
For quick WiFi connection setup (less secure than manual password entry).
Note: The specific feature set varies greatly between Wavlink's diverse product lines (e.g., AC1200 routers, N300 extenders, Halo mesh systems).
Explore Other Router Brands
Discover more router brands and their login details