V-SOL Router Login
VSOL (V-Solution Telecommunication Technology Co., Ltd.) manufactures networking equipment, particularly GPON/EPON Optical Network Units (ONUs/ONTs) and routers used in Fiber-to-the-Home (FTTH) deployments. Accessing the admin panel allows configuration.
How to Login to V-SOL Router
Accessing your VSOL ONU/ONT or router settings is essential for managing your fiber internet connection and Wi-Fi network (if applicable). VSOL devices are often used by various Internet Service Providers.
The default gateway IP address can differ depending on the specific model and its configuration. Common addresses include 192.168.1.1 or 192.168.100.1 (often used for ONTs). Always check the label on the bottom or back of the VSOL device first for the correct IP address and login credentials.
Default login details for VSOL equipment are quite variable. Possibilities include: 'admin'/'admin', 'admin'/'password', 'root'/'admin', 'telecomadmin'/'admintelecom' (common for superadmin access on some ONTs), or 'user'/'user' (for basic user access). The sticker on the device is the most reliable source for this information. A wired Ethernet connection provides the most stable link for configuration.
- Connect your computer to the VSOL device network, preferably using an Ethernet cable for setup.
- Launch a web browser.
- Enter the default IP address in the address bar. Common IPs for VSOL devices are 'http://192.168.1.1' or '192.168.100.1'. Check the device label.
- On the login page, enter the default username and password. These vary widely by model and ISP configuration. Try combinations like 'admin'/'admin', 'admin'/'password', 'telecomadmin'/'admintelecom', 'root'/'admin', 'user'/'user', or check the device sticker.
- Click 'Login'.
Default IPs, username and password for V-SOL
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| V-SOL | 192.168.1.1 | admin | admin | 98% |
| V-SOL | 192.168.100.1 | admin | admin | 93% |
Popular Router Models using V-SOL
| Model | IP | Username | Password |
|---|---|---|---|
| V2801F | 192.168.1.1 | admin | admin |
| HG323AC | 192.168.1.1 | admin | admin |
Troubleshooting Issues with V-SOL Router
Having trouble logging into your VSOL device? Try these steps:
- Verify IP Address: Ensure you're using the correct IP (e.g., 192.168.1.1, 192.168.100.1). Confirm from the device label or try the alternative if one fails.
- Check Connection: Make sure your PC is properly connected via Ethernet cable to a LAN port on the VSOL device.
- Accurate Credentials: Double-check the username and password, paying close attention to case sensitivity. Use credentials from the sticker if available. Try various common combinations ('admin'/'admin', 'admin'/'password', 'root'/'admin', 'telecomadmin'/'admintelecom', 'user'/'user') if sticker details fail or are missing.
- Browser Issues: Clear browser cache/cookies, use an incognito/private window, or try a different browser (Chrome, Firefox, Edge).
- Device Reboot: Unplug the VSOL device's power, wait 30-60 seconds, plug it back in, and wait a few minutes for it to fully boot and synchronize.
- Factory Reset (Caution): If you've lost custom login details, a factory reset might be needed. Locate the reset button (usually recessed), press and hold it for 10-15 seconds until the lights indicate a reset. This erases all custom settings. Use the default credentials (likely from the sticker or common defaults) afterwards. Contact your ISP before resetting, as ONU/ONT devices may require specific provisioning.
V-SOL Router setup
Once logged into the VSOL admin interface, focus on these key setup steps (availability depends on user level - user vs admin):
- Change Admin Password: Secure your device by changing the default administrative password(s) immediately.
- Configure Wi-Fi (If applicable): If your VSOL device includes Wi-Fi, set a unique SSID (network name) and use strong WPA2/WPA3 encryption with a complex password.
- Check WAN/Internet Settings: Verify connection type (e.g., PPPoE, DHCP, Static IP) and status. Ensure any required ISP credentials are correctly entered (often done by ISP or via admin login).
- Check Optical Information (ONTs): View optical power levels (Tx/Rx Power) for troubleshooting fiber signal issues (usually requires admin access).
- Firmware Update: Look for firmware update options, though this is often managed by the ISP, especially for ONTs.
- Review Security Settings: Configure basic firewall settings or MAC filtering if available and needed.
- Save Configuration: Always apply or save your changes before logging out.
Popular IPs for V-SOL
Frequently Asked Questions about V-SOL
What is V-SOL?
VSOL (V-Solution) is a company manufacturing networking equipment, specializing in FTTH products like GPON/EPON ONUs/ONTs and routers.
How to change V-SOL's WiFi Password or SSID?
If the device has Wi-Fi: Log in, look for Wireless/WLAN settings, find the Security Key/Password field, enter the new password, and save/apply.
What if I forget the V-SOL password?
Perform a factory reset (hold reset button 10-15 seconds). Log in using the default username/password (check sticker or try common pairs). Reconfigure settings. Contact ISP if unsure.
Can I change V-SOL to another IP?
The device's LAN IP address can usually be changed in the LAN Setup or Network Settings section (typically requires admin access).
How to Protect Your WiFi Network Using V-SOL?
Use strong passwords for admin and Wi-Fi (WPA2/WPA3), change defaults, keep firmware updated (often ISP controlled).
How to reset your V-SOL login password?
A factory reset deletes all personalized settings (Wi-Fi SSID/password, admin login, PPPoE details, custom rules) and reverts to the original factory state.
What are the most common default logins for V-SOL?
Highly variable. Check sticker. Common options: 'admin'/'admin', 'admin'/'password', 'root'/'admin', 'telecomadmin'/'admintelecom', 'user'/'user'.
What is the most common default username for V-SOL?
Often 'admin', 'root', 'telecomadmin', or 'user'. Check the device label.
What is the default password for V-SOL?
Commonly 'admin', 'password', 'admintelecom'. Check the label for specifics.
Advanced V-SOL Router Settings
VSOL devices, particularly ONUs/ONTs accessed with administrator privileges, can offer advanced features relevant to FTTH networks:
VLAN Configuration
Settings for tagging traffic with VLAN IDs, crucial for delivering multiple services (Internet, VoIP, IPTV) over fiber.
PPPoE Client Configuration
Setting up the username and password for PPPoE internet connections.
Port Forwarding / Virtual Server
Configure rules to allow external access to specific services on the local network.
QoS Configuration
Quality of Service settings to prioritize different types of traffic (e.g., voice, video).
IGMP Snooping / Proxy
Settings related to multicast traffic management, often used for IPTV services.
Optical Module Information
Detailed status of the fiber connection, including transmit (Tx) and receive (Rx) optical power levels.
TR-069 Client Settings
Configuration related to the CPE WAN Management Protocol used by ISPs for remote management.
VoIP Configuration (If Applicable)
Settings for integrated Voice over IP functionality if supported by the device model.
Note: Access to many advanced features often requires higher-level login credentials (e.g., 'telecomadmin') and may be restricted or pre-configured by the Internet Service Provider.
Explore Other Router Brands
Discover more router brands and their login details