Shelly Device Router Login
Shelly devices (by Allterco Robotics) are popular WiFi-enabled smart home components. Most Shelly devices host their own web server for direct local access and configuration via their IP address.
How to Login to Shelly Device Router
Accessing your Shelly device directly via its web interface provides local control and access to more advanced settings than typically available in the Shelly Cloud app. This is useful for local automation, troubleshooting, or if cloud access is down.
Step 1: Find the IP Address. Your Shelly device must be connected to your WiFi network. You can find its IP address:
- In the Shelly Cloud app: Go to Device Settings > Device Information > Device IP.
- In your router's admin panel: Look at the list of connected devices or DHCP clients.
- Using a network scanner app (like Fing) on your phone or computer.
Step 2: Access via Browser. Open a web browser on a computer or phone that is connected to the *same* WiFi network as the Shelly device. Type the IP address you found (e.g., http://192.168.1.55) into the address bar and press Enter.
Step 3: Login (if password protected). By default, many Shelly devices allow access without a password. However, if you have enabled 'Restrict Login' or 'Device Protection' in the settings (highly recommended), you will be prompted for a username (default is admin) and the password you set previously.
- Ensure the Shelly device is powered on and connected to your WiFi network.
- Find the Shelly device's IP address (using the Shelly app, your router's connected devices list, or discovery tools).
- Open a web browser on a device connected to the same network.
- Enter the Shelly device's IP address into the address bar (e.g., http://192.168.X.Y).
- The Shelly web interface should load. Access might be unrestricted or require a password if you've set one.
- If prompted for login, enter the username (usually 'admin') and the password you configured in the Shelly app/web UI under 'Device Protection'.
Default IPs, username and password for Shelly Device
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Shelly Device | 192.168.33.1 | admin | admin | 80% |
| Shelly Device | 192.168.1.1 | admin | admin | 98% |
Popular Router Models using Shelly Device
| Model | IP | Username | Password |
|---|---|---|---|
| Shelly Plus 1 | 192.168.33.1 | ||
| Shelly Plug S | 192.168.33.1 |
Troubleshooting Issues with Shelly Device Router
Can't access your Shelly device's web interface? Check these things:
- Correct IP Address: Double-check the IP address. Shelly devices typically get dynamic IPs via DHCP, so the IP might change if the device reboots or the router assigns a new one. Verify the current IP.
- Same Network: Ensure the device you're using the browser on is connected to the exact same WiFi network (and subnet) as the Shelly device.
- Device Powered On: Confirm the Shelly device has power and is connected to WiFi (check its status in the Shelly app if possible).
- Password Protection: If you set a password via the app or web UI ('Restrict Login'), make sure you are entering the correct username ('admin') and password.
- Network Issues: Firewalls or network segmentation (VLANs) could potentially block access between your computer and the Shelly device.
- Device Malfunction: In rare cases, the device itself might be malfunctioning. Try power cycling the Shelly device (turn off its breaker/power source, wait 10 seconds, turn back on).
- Factory Reset (Last Resort): Most Shelly devices have a reset procedure (e.g., pressing a button, toggling a switch multiple times quickly). This will remove it from your WiFi network and erase settings, requiring re-adding it via the Shelly app. Consult the specific Shelly device manual for its reset procedure.
Shelly Device Router setup
Within the Shelly device's web interface, you can configure various settings:
- WiFi Settings: Connect the device to a new WiFi network or configure a static IP address.
- Restrict Login / Device Protection: Set a username and password to secure access to the web interface (Highly Recommended).
- Actions / Timers: Configure schedules, timers, and actions based on switch inputs or other events (powerful for local automation).
- Power Monitoring (on supported devices): View real-time and historical power consumption data (e.g., Shelly PM devices).
- MQTT / CoIoT / Webhooks: Configure integration with home automation systems like Home Assistant, openHAB, Node-RED via standard protocols.
- Firmware Update: Check for and install firmware updates directly onto the device.
- Device Information: View device details like MAC address, IP address, signal strength, firmware version.
- Device Specific Settings: Configure behavior specific to the device type (e.g., relay power-on default, button type, dimmer settings, roller shutter calibration).
Popular IPs for Shelly Device
Frequently Asked Questions about Shelly Device
What is Shelly Device?
Shelly devices are smart home components (relays, plugs, sensors, bulbs). Shelly device login refers to accessing the device's built-in web configuration page via its local IP address.
How to change Shelly Device's WiFi Password or SSID?
Access the web UI via IP. Go to 'Settings' > 'Device Protection' or 'Restrict Login'. Enable protection and set/change the password. The username is usually fixed as 'admin'.
What if I forget the Shelly Device password?
If you forgot the password set for 'Restrict Login', you typically need to perform a factory reset on the Shelly device itself. Consult the device manual for the reset procedure.
Can I change Shelly Device to another IP?
In the web UI, go to 'Internet & Security' > 'WiFi Mode - Client'. You can configure a static IP address here instead of using DHCP.
How to Protect Your WiFi Network Using Shelly Device?
Enable 'Restrict Login' with a strong password. Keep firmware updated. Secure your WiFi network itself with a strong password (WPA2/WPA3).
How to reset your Shelly Device login password?
Factory resetting a Shelly device removes its WiFi configuration, erases all settings (including login password), and requires re-adding it to your network/Shelly account.
What are the most common default logins for Shelly Device?
By default, there's often no login required. If 'Restrict Login' is enabled, the username is 'admin' and the password is the one you set.
What is the most common default username for Shelly Device?
'admin' (if protection is enabled).
What is the default password for Shelly Device?
None by default. You must set one under 'Restrict Login' or 'Device Protection'.
Advanced Shelly Device Router Settings
The local web interface of Shelly devices unlocks powerful features for customization and integration:
Local Action Execution
Define complex automation rules (Actions) that run directly on the device, independent of the cloud or external controllers (e.g., 'if switch input 1 is pressed, send HTTP request to another Shelly').
MQTT Integration
Directly connect the Shelly device to an MQTT broker for seamless integration with platforms like Home Assistant, Node-RED, etc.
CoIoT Protocol
Shelly's CoAP-based protocol for local communication, often used for auto-discovery in home automation systems.
REST API / Webhooks
Control the device and get status updates via simple HTTP commands, enabling integration with custom scripts and systems.
Custom Firmware Flashing
Some Shelly devices allow flashing alternative open-source firmware like Tasmota or ESPHome (advanced users only, voids warranty).
Detailed Power Monitoring Calibration
On power monitoring devices (PM series), advanced settings might allow voltage/power calibration.
Scripting (Gen2/Plus/Pro Devices)
Newer generation Shelly devices support mJS (JavaScript) scripting directly on the device for highly customized local automation.
Note: Availability of these features depends on the specific Shelly device model and its firmware generation (Gen1 vs Gen2/Plus/Pro).
Explore Other Router Brands
Discover more router brands and their login details