Sercomm Router Login
Sercomm manufactures broadband and wireless networking equipment often supplied by Internet Service Providers (ISPs) under their own brands. This guide helps access the admin interface.
How to Login to Sercomm Router
Accessing your Sercomm-manufactured router or gateway settings allows management of WiFi, security, and connection parameters. Sercomm devices are often rebranded by ISPs (like Comcast Xfinity, Charter Spectrum, etc.).
The default gateway IP address frequently used by Sercomm devices is 192.168.0.1 or 10.0.0.1 (common with Comcast Xfinity gateways). Always verify the correct IP by checking the sticker on your specific device or consulting your ISP's setup instructions.
Default login credentials vary significantly depending on the ISP's configuration. Common pairs include Username: admin / Password: password, or Username: admin / Password: admin. However, it is very common for ISPs to set a unique default password printed on the device label. Look for 'Password', 'Network Key', or similar on the sticker. If you've changed it via an ISP portal or initial setup, use your custom password.
- Connect your computer or device to the Sercomm router/gateway's network via WiFi or Ethernet.
- Open a web browser.
- Enter the device's default IP address. Common IPs for Sercomm gateways are 'http://192.168.0.1' or '10.0.0.1'. Check the device label or ISP guide.
- The login page will appear.
- Enter the default username and password. Common defaults are 'admin'/'password', 'admin'/'admin', or unique credentials printed on the device sticker. Check carefully.
- Click 'Login'.
Default IPs, username and password for Sercomm
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Sercomm | 192.168.0.1 | admin | admin | 97% |
| Sercomm | 192.168.1.254 | admin | admin | 95% |
| Sercomm | 10.0.0.1 | admin | password | 96% |
Popular Router Models using Sercomm
| Model | IP | Username | Password |
|---|---|---|---|
| H500-s (Sky) | 192.168.0.1 | admin | sky |
| RV6699 (Vodafone) | 192.168.1.254 | admin | admin |
Troubleshooting Issues with Sercomm Router
Unable to log in to your Sercomm device? Try these steps:
- Check Network Connection: Ensure you are connected to the correct WiFi network or using a working Ethernet cable.
- Verify IP Address: Double-check the IP address (192.168.0.1 or 10.0.0.1). Confirm from the label or ISP guide.
- Confirm Credentials: Carefully enter the username (usually 'admin') and password. Prioritize the unique password printed on the sticker over generic defaults like 'password'. Check case sensitivity.
- ISP Password Resets: Some ISPs allow resetting the router password via their website or app. Check your ISP's support resources.
- Device Reboot: Power cycle the gateway. Unplug it, wait 30-60 seconds, plug it back in, and allow several minutes for it to fully initialize and reconnect.
- Browser Issues: Clear browser cache/cookies or try using an incognito/private window.
- Factory Reset (Caution): Locate the reset button (often recessed). Press and hold it for 15-30 seconds while powered on until the lights indicate a reset. This restores factory defaults (use credentials from label afterwards) but erases ALL custom settings (WiFi name/pass, potentially custom configurations). The device will need to re-provision with the ISP, which can take time. Use as a last resort.
Sercomm Router setup
After logging into the Sercomm gateway interface (user access level might be limited by ISP):
- Change/Verify WiFi Settings: Customize your WiFi network name(s) (SSID) and ensure a strong WPA2/WPA3 password is set. These might also be managed via your ISP's app/portal.
- Change Admin Password (If Possible): If the interface allows direct change of the login password, consider setting a custom one (and record it securely). Often, this is managed via the ISP portal.
- Check Connection Status: Review WAN (Internet) connection status, DOCSIS/Fiber status, and IP information.
- Manage Connected Devices: View the list of devices currently connected to your network.
- Review Firewall/Security Settings: Check basic firewall settings (usually managed by ISP defaults).
- Check Firmware Version: Note the firmware version; updates are almost always handled automatically by the ISP.
Popular IPs for Sercomm
Frequently Asked Questions about Sercomm
What is Sercomm?
Sercomm is a manufacturer of telecommunications equipment. Their routers/gateways are frequently provided by ISPs (like Xfinity, Spectrum) for cable, fiber, or DSL internet.
How to change Sercomm's WiFi Password or SSID?
Often best managed via your ISP's mobile app or website portal. If direct access is allowed, log in, go to Wireless/WiFi settings -> Security, and change the WiFi password.
What if I forget the Sercomm password?
Check ISP app/portal for reset options. Otherwise, perform a factory reset using the reset button. Log in with default credentials from the sticker. Reconfigure.
Can I change Sercomm to another IP?
The gateway's LAN IP (e.g., 192.168.0.1) can sometimes be changed in LAN settings, but it's rarely needed and might conflict with ISP management.
How to Protect Your WiFi Network Using Sercomm?
Use strong WiFi passwords (WPA2/WPA3). Change admin password if possible/desired (often managed via ISP). Rely on ISP for firmware updates.
How to reset your Sercomm login password?
Resetting erases all custom settings. Uses default credentials from label afterwards. Device needs to re-sync with ISP network.
What are the most common default logins for Sercomm?
IP '192.168.0.1' or '10.0.0.1'. User 'admin'. Pass 'password' or unique password on sticker. Check label carefully.
What is the most common default username for Sercomm?
Almost always 'admin'.
What is the default password for Sercomm?
Commonly 'password', but very often a unique password printed on the device sticker.
Advanced Sercomm Router Settings
Sercomm gateways provided by ISPs offer features tailored for broadband delivery, though user access varies:
DOCSIS/Fiber Diagnostics
Detailed information on cable or fiber signal levels, bonding channels, error rates (access may be limited).
MoCA Networking
(Multimedia over Coax Alliance) Support for networking over existing coaxial cables in the home (on compatible models).
Voice/Telephony Integration
Built-in support and ports for VoIP phone services provided by the ISP.
Advanced Firewall Settings
May offer more granular firewall rules, port triggering, DMZ settings (user access varies).
Parental Controls & Access Scheduling
Tools to restrict internet access by device, time, or content category (often better managed via ISP app).
Remote Management (TR-069)
Allows the ISP to remotely configure, manage, and troubleshoot the gateway.
Note: Many advanced settings on ISP-provided Sercomm gateways are locked down or intended for ISP management rather than end-user configuration.
Explore Other Router Brands
Discover more router brands and their login details