Iconnet Router Login
Iconnet, the internet service provider arm of Indonesia's state electricity company PLN, supplies customers with routers or Optical Network Units (ONUs) for their fiber internet service. Accessing the device's admin panel allows managing Wi-Fi and network settings.
How to Login to Iconnet Router
Managing your Iconnet (PLN) internet connection requires accessing the web interface of the router or ONU provided. This interface lets you control essential settings like your Wi-Fi network name (SSID) and password.
The specific device model Iconnet installs can vary, impacting the default IP address and login. Common IPs are 192.168.1.1 or 192.168.100.1 (frequently used for ONUs). Always check the sticker on the bottom or back of your Iconnet device first, as it should list the correct IP and default login credentials.
Default login details are particularly diverse. Common pairs include 'admin'/'admin' or 'user'/'user'. Specific models might use 'support'/'support', or ISP-specific defaults sometimes seen in the region like 'admin'/'Telkomdso123' (though this is more associated with Telkom, it might appear on similar Huawei devices). The sticker on the device remains the most reliable source. Use a wired Ethernet connection for stability during initial setup if possible.
- Connect your computer or device to the Iconnet network via Wi-Fi or an Ethernet cable connected to the ONU/router.
- Launch a web browser.
- Enter the default IP address of your Iconnet device into the address bar. Common IPs include 'http://192.168.1.1' or '192.168.100.1' (often for ONUs). Check the device label.
- On the login page, enter the required username and password. Defaults vary greatly by device model (e.g., Huawei, ZTE, Fiberhome). Try 'admin'/'admin', 'user'/'user', 'support'/'support', 'admin'/'Telkomdso123' (sometimes seen on Huawei), or check the sticker.
- Click the 'Login' button.
Default IPs, username and password for Iconnet
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Iconnet | 192.168.1.1 | admin | admin | 98% |
| Iconnet | 192.168.100.1 | admin | admin | 93% |
Popular Router Models using Iconnet
| Model | IP | Username | Password |
|---|---|---|---|
| Huawei HG8245H5 | 192.168.100.1 | support | theworldinyourhand |
Troubleshooting Issues with Iconnet Router
Cannot access your Iconnet router/ONU login page? Try these steps:
- Check IP Address: Ensure you're using the correct IP, likely 192.168.1.1 or 192.168.100.1. Confirm from the device label or try the other if one fails.
- Verify Connection: Make sure you are connected to the Iconnet network (wired or wireless).
- Confirm Credentials: Carefully check the username and password from the device sticker. Try various common combinations ('admin'/'admin', 'user'/'user', 'support'/'support', regional defaults) if the sticker is missing or unreadable. Remember case sensitivity.
- Browser Issues: Clear your browser's cache and cookies, try an incognito/private window, or use a different web browser.
- Reboot Device: Restart your Iconnet ONU/router. Unplug the power adapter, wait 30-60 seconds, plug it back in, and wait a few minutes for it to initialize completely.
- Factory Reset (Caution): If you've forgotten a changed password, a factory reset might be necessary. Find the reset button (often recessed), press and hold it for 10-15 seconds until the device resets. This erases all custom settings. Log in using the default credentials found on the sticker or common defaults. Contact Iconnet support before resetting if unsure, as ONU reconfiguration might be complex.
Iconnet Router setup
After successfully logging into your Iconnet device's admin panel (access level may vary):
- Change Admin Password: Secure your device by immediately changing the default administrative login password(s).
- Configure Wi-Fi: Set a unique Wi-Fi network name (SSID) and use a strong WPA2/WPA3 password. Adjust channel settings if experiencing interference.
- Check WAN/Internet Settings: Verify the connection type (often DHCP or PPPoE for Iconnet). Ensure connection is active. PPPoE credentials might be needed if not pre-configured.
- Check Optical Status (ONU): If possible (often requires admin login), check optical power levels (Rx Power) for troubleshooting signal.
- Firmware Updates: Look for a firmware update option, though this might be managed by Iconnet remotely.
- Review Security: Check basic firewall settings. Disable WPS if you don't use it.
- Save Configuration: Always apply or save any changes made in the interface.
Popular IPs for Iconnet
Frequently Asked Questions about Iconnet
What is Iconnet?
Iconnet is the fiber optic internet service brand from Indonesia's state electricity company, PLN. An 'Iconnet router' refers to the ONU or router provided.
How to change Iconnet's WiFi Password or SSID?
Log in, find the Wireless Settings / Wi-Fi Security section, enter a new password in the appropriate field, and save.
What if I forget the Iconnet password?
Perform a factory reset (hold reset button 10-15 sec). Log in with default credentials (check sticker or try common defaults). Reconfigure Wi-Fi and potentially PPPoE settings.
Can I change Iconnet to another IP?
The device's LAN IP (e.g., 192.168.1.1) can usually be changed in LAN/Network settings, but it's typically not needed for home use and requires care.
How to Protect Your WiFi Network Using Iconnet?
Change default admin and Wi-Fi passwords, use WPA2/WPA3 encryption, keep firmware updated if possible.
How to reset your Iconnet login password?
Resetting erases all custom configurations: Wi-Fi name/password, admin login, PPPoE details (if manually entered), port forwarding, etc., restoring defaults.
What are the most common default logins for Iconnet?
Highly variable depending on ONU/router model (Huawei, ZTE, Fiberhome, etc.). Check sticker. Try 'admin'/'admin', 'user'/'user', 'support'/'support', or regional defaults.
What is the most common default username for Iconnet?
Often 'admin', 'user', or 'support'. Check the device label.
What is the default password for Iconnet?
Commonly 'admin', 'user', 'support', or specific defaults potentially printed on the label.
Advanced Iconnet Router Settings
Iconnet-provided ONUs/routers might offer some advanced functionalities, depending on the model and user login level:
Port Forwarding / Virtual Servers
Allow external access to specific services hosted on your local network.
DHCP Server Settings
Customize the local IP address pool or set static IP reservations for devices.
VLAN Configuration (ONTs)
Settings related to Virtual LANs, often pre-configured by Iconnet for service delivery.
QoS (Quality of Service)
Basic options might exist to prioritize certain types of network traffic.
UPnP / IGMP Settings
Enable/disable Universal Plug and Play or configure IGMP for multicast/IPTV traffic.
Optical Network Diagnostics
View Rx/Tx optical power levels and other fiber link parameters (usually requires admin login).
PPPoE/WAN Configuration
Enter or view credentials and settings for the primary internet connection.
VoIP/CATV Settings (If Applicable)
Configuration related to integrated phone or cable TV services if delivered via the ONU.
Note: Access to advanced settings can be limited, especially with standard 'user' logins. Full administrative access might require different credentials sometimes known only by ISP technicians.
Explore Other Router Brands
Discover more router brands and their login details