DishHome Fibernet Router Login
DishHome FiberNet provides high-speed internet using Optical Network Terminals (ONT) or routers. This guide helps you access the web interface of your DishHome supplied device to manage your WiFi and network settings.
How to Login to DishHome Fibernet Router
Accessing your DishHome FiberNet router settings allows you to customize your network. Depending on the manufacturer (commonly Nokia, ZTE, Huawei, etc.), the default IP address might vary. Popular choices are 192.168.1.1 or 192.168.100.1 (often for ONT devices). Ensure you are connected to the network first.
Default login credentials can be tricky. Standard pairs like admin/admin might work, but ISP-customized firmware often uses combinations like useradmin/useradmin, telecomadmin/admintelecom, or specific ones like dhuser/[unique password]. Always check the sticker on the bottom or back of your router for the correct default username and password.
Once logged in, you can change the WiFi name and password, check connected devices, monitor the fiber connection status (ONT Status), and configure basic security settings.
- Connect your computer or smartphone to the DishHome FiberNet WiFi network or use an Ethernet cable connected to the router.
- Open your web browser.
- Enter the default gateway IP address. Common IPs for DishHome routers include 'http://192.168.1.1', '192.168.100.1', or '192.168.1.254'. Check your specific model.
- The login page should appear.
- Enter the default username. This is often 'admin', 'useradmin', 'telecomadmin', or 'dhuser'.
- Enter the default password. Common passwords include 'admin', 'admintelecom', 'password', or specific credentials found on the router's sticker (highly recommended to check).
- Click 'Login'.
Default IPs, username and password for DishHome Fibernet
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| DishHome Fibernet | 192.168.1.1 | admin | admin | 98% |
| DishHome Fibernet | 192.168.0.1 | admin | admin | 97% |
Popular Router Models using DishHome Fibernet
| Model | IP | Username | Password |
|---|---|---|---|
| Nokia G-140W-F | 192.168.1.1 | user | user |
| ZTE F670L | 192.168.1.1 | user | user |
Troubleshooting Issues with DishHome Fibernet Router
Problems logging into your DishHome FiberNet router? Try these steps:
- Check the IP Address: Try the most common IPs: '192.168.1.1', '192.168.100.1', '192.168.1.254'. Confirm the correct one by checking your device's network settings for the 'Default Gateway'.
- Verify Network Connection: Ensure you're connected to the DishHome WiFi or using a functional Ethernet cable plugged into a LAN port.
- Examine Router Sticker: This is the most critical step. Look carefully at the sticker on your router for the exact default IP, username, and password.
- Try Common Credentials: If the sticker is missing or unreadable, try combinations like: admin/admin, useradmin/useradmin, telecomadmin/admintelecom, dhuser/[check sticker], admin/[check sticker]. Remember case sensitivity.
- Browser Issues: Clear your browser's cache and cookies, use an incognito/private window, or try a different web browser.
- Restart Router/ONT: Power cycle the device. Unplug it, wait 30 seconds, plug it back in. Allow a few minutes for it to reconnect to the network.
- Factory Reset: If you changed the password and forgot it, find the reset button (small, recessed). Press and hold it for 10-15 seconds while the device is on. This restores the factory defaults printed on the sticker but erases all your custom settings. *Use as a last resort.*
- Contact DishHome Support: If you still can't log in, especially after a reset, contact DishHome customer support for assistance.
DishHome Fibernet Router setup
After successfully accessing your DishHome FiberNet router's admin panel:
- Change Default Passwords: Immediately change both the administrative login password (if possible and different from WiFi) and the WiFi password to strong, unique values.
- Customize WiFi SSID: Set a personalized name for your WiFi network.
- Configure WiFi Security: Ensure WPA2 or WPA3 encryption is enabled with your strong password.
- Check Fiber Connection Status (ONT): Familiarize yourself with the optical signal strength page (if available) to monitor connection health.
- Review Connected Devices: Check the list of devices connected to your network to ensure no unauthorized access.
- Firmware Updates: Look for a firmware update section. While often managed by DishHome, check if manual updates are possible or needed.
- Enable Basic Security: Ensure the firewall is active (usually default). Avoid enabling risky features like DMZ unless you understand the implications.
- Guest Network (Optional): Set up a guest WiFi network if your router supports it and you need it.
Popular IPs for DishHome Fibernet
Frequently Asked Questions about DishHome Fibernet
What is DishHome Fibernet?
The DishHome FiberNet router (often an ONT - Optical Network Terminal) is the device provided by DishHome Nepal to connect your home to their fiber optic internet service.
How to change DishHome Fibernet's WiFi Password or SSID?
Log in to the router (using IP like 192.168.1.1 or 192.168.100.1), navigate to WLAN, Wireless, or Network settings, find the Security or Pre-Shared Key option, and change the WiFi password.
What if I forget the DishHome Fibernet password?
Forgetting the admin password usually requires a factory reset (restores sticker defaults). Forgetting the WiFi password requires logging in as admin or resetting.
Can I change DishHome Fibernet to another IP?
The router's LAN IP can usually be changed in LAN/Network settings, but it's generally advised to keep the default unless necessary for specific network configurations.
How to Protect Your WiFi Network Using DishHome Fibernet?
Change default admin and WiFi passwords immediately. Use strong WPA2/WPA3 encryption. Keep firmware updated. Disable UPnP and remote access if not needed.
How to reset your DishHome Fibernet login password?
Resetting the DishHome router/ONT erases all custom settings (WiFi name/password, admin password changes) and restores the factory defaults printed on the device sticker.
What are the most common default logins for DishHome Fibernet?
Common IPs: '192.168.1.1', '192.168.100.1'. Usernames: 'admin', 'useradmin', 'telecomadmin', 'dhuser'. Passwords: 'admin', 'admintelecom', 'password', or unique on sticker. **Check sticker first!**
What is the most common default username for DishHome Fibernet?
Highly variable: 'admin', 'useradmin', 'telecomadmin', 'dhuser' are possibilities. Check the label.
What is the default password for DishHome Fibernet?
Highly variable: 'admin', 'admintelecom', 'password', or a unique password printed on the device label is most likely.
Advanced DishHome Fibernet Router Settings
DishHome FiberNet routers/ONTs, depending on the model, might offer advanced functionalities:
Optical Network Status
Detailed information on the fiber connection, including Rx/Tx optical power levels (important for diagnosing signal issues).
Port Forwarding & Virtual Servers
Configure rules to allow external access to specific devices or services on your local network.
QoS (Quality of Service)
Prioritize certain types of traffic (e.g., streaming, voice calls) over others.
Device Management & Filtering
View connected devices, potentially block devices by MAC address, or set up parental controls.
IPv6 Configuration
Settings related to IPv6 deployment and usage.
VoIP Settings (if applicable)
Configuration related to integrated voice services if offered by DishHome through the ONT.
System Logs & Diagnostics
Access logs and diagnostic tools (like Ping, Traceroute) for troubleshooting.
Multiple SSIDs
Some models might allow creating additional guest or secondary WiFi networks.
Note: The specific features available will depend heavily on the manufacturer (Nokia, Huawei, ZTE, etc.) and model of the ONT/router provided by DishHome FiberNet.
Explore Other Router Brands
Discover more router brands and their login details