Converge ICT Router Login
Converge ICT Solutions provides high-speed fiber internet in the Philippines, typically supplying an Optical Network Terminal (ONT) that acts as a modem/router. This guide covers accessing its settings.
How to Login to Converge ICT Router
Accessing your Converge FiberX router settings allows you to manage your WiFi network name and password, check connected devices, and configure basic options. Converge often uses ONTs (Optical Network Terminals) from manufacturers like Huawei, ZTE, or FiberHome.
The most common default IP addresses to access the admin interface are 192.168.1.1 or, frequently for fiber ONTs, 192.168.100.1. Ensure your device is connected to the network provided by the Converge ONT.
Launch your browser and enter one of the IPs. You will be prompted for login credentials. Common default pairs are admin/admin or user/user. However, it is crucial to check the sticker on your specific Converge ONT device, as it often contains unique default credentials (username and password). Sometimes, one set of credentials (`user`/`user`) gives basic access, while another (`admin`/`admin` or device-specific) provides full administrative access.
- Connect your computer or device to your Converge WiFi network or via an Ethernet cable to the ONT.
- Open a web browser.
- Type 'http://192.168.1.1' or '192.168.100.1' into the address bar and press Enter.
- Enter the username and password. Common defaults: 'admin'/'admin', 'user'/'user', or check the sticker on the bottom/back of the ONT.
- Click 'Login' or 'Sign In'.
Default IPs, username and password for Converge ICT
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Converge ICT | 192.168.1.1 | admin | admin | 98% |
| Converge ICT | 192.168.100.1 | admin | admin | 93% |
Popular Router Models using Converge ICT
| Model | IP | Username | Password |
|---|---|---|---|
| FiberHome AN5506-04-FA | 192.168.1.1 | user | user |
| Huawei HG8145V5 | 192.168.100.1 | admin | password |
| ZTE F670L | 192.168.1.1 | user | user |
Troubleshooting Issues with Converge ICT Router
Facing issues logging into your Converge router/ONT? Try these steps:
- IP Address Check: Carefully try both '192.168.1.1' and '192.168.100.1'. Ensure you're typing into the address bar.
- Verify Connection: Confirm you are connected to the correct WiFi network or use a known-good Ethernet cable plugged into a LAN port on the ONT.
- Check Device Sticker: The default username and password are USUALLY printed on a label on the Converge device. Look carefully on the bottom or back.
- Try Common Defaults: If the sticker is unreadable, try 'admin'/'admin', 'user'/'user'. Remember case sensitivity.
- User vs. Admin Login: Some devices have separate 'user' (limited view) and 'admin' (full access) logins. Try both if listed on the sticker.
- Browser Cache/Mode: Clear your browser's cache, cookies, and history, or use an incognito/private window. Try a different browser.
- ONT Reboot: Power cycle the Converge ONT. Unplug it, wait a minute, plug it back in, and wait several minutes for it to fully initialize before trying to log in again.
- Factory Reset (Caution): Pressing the recessed reset button for 10-15 seconds restores factory defaults (credentials on the sticker). *Warning: This erases custom WiFi names/passwords and may require reconfiguration or assistance from Converge if PPPoE settings are lost.* Contact Converge support before doing this if unsure.
Converge ICT Router setup
Once logged into your Converge ONT's admin panel (usually with 'admin' level credentials), consider these common tasks:
- Change WiFi Password: This is the most important step. Go to WLAN/Wireless/WiFi settings and set a strong, unique password (WPA2/WPA3).
- Change WiFi Name (SSID): Customize your network name if desired. Consider separate names for 2.4GHz and 5GHz bands if available and preferred.
- Change Admin Login Password: If possible (depends on model/firmware), change the password used to access the admin interface (192.168.1.1 or 192.168.100.1) itself for added security.
- Review Connected Devices: Check the list of devices connected to your network via WiFi or Ethernet.
- Check WAN/Internet Status: Verify your fiber connection status and IP address information.
- Firmware Updates (ISP Managed): Firmware updates are typically pushed automatically by Converge. A manual check option might exist but usually isn't necessary or recommended.
- Reboot ONT: Apply significant changes by rebooting the device via the interface menu.
Popular IPs for Converge ICT
Frequently Asked Questions about Converge ICT
What is Converge ICT?
Converge ICT Solutions is a major fiber internet provider in the Philippines. The 'Converge router' typically refers to the Optical Network Terminal (ONT) device they supply.
How to change Converge ICT's WiFi Password or SSID?
Log into the admin interface (e.g., 192.168.1.1), navigate to 'WLAN', 'Wireless', or 'WiFi Settings', find the password/security key field, enter your new password, and save.
What if I forget the Converge ICT password?
If you forgot your custom WiFi password, you can factory reset the ONT (hold reset button 10-15s) and use the default WiFi password from the sticker. If you forgot a custom admin password, a reset is also needed.
Can I change Converge ICT to another IP?
Changing the ONT's LAN IP (192.168.1.1/192.168.100.1) is usually possible in 'LAN Settings' but generally not advised unless necessary for your network setup.
How to Protect Your WiFi Network Using Converge ICT?
Use a strong WPA2/WPA3 WiFi password. Keep the default admin credentials (from sticker) safe. Change the admin password if possible. Be cautious with port forwarding.
How to reset your Converge ICT login password?
A factory reset reverts the ONT to its original settings, including the default WiFi name/password and admin login found on the sticker. Custom settings are lost. May require Converge intervention if specific ISP settings are cleared.
What are the most common default logins for Converge ICT?
Check the sticker! Common pairs are 'admin'/'admin', 'user'/'user', or unique credentials printed on the device. IP is usually 192.168.1.1 or 192.168.100.1.
What is the most common default username for Converge ICT?
Typically 'admin' or 'user'. Check the sticker.
What is the default password for Converge ICT?
Typically 'admin', 'user', or a unique password printed on the sticker.
Advanced Converge ICT Router Settings
Converge ONTs, depending on the model (often Huawei, ZTE, FiberHome), might offer these advanced settings (usually requiring admin-level login):
Port Forwarding
Allow external internet traffic to reach specific devices/ports on your local network (for servers, cameras, etc.).
DMZ (Demilitarized Zone)
Expose a single internal device directly to the internet (use with caution).
UPnP (Universal Plug and Play)
Allows automatic port configuration by applications (convenient but potentially less secure).
MAC Filtering
Restrict network access to only allowed devices based on their MAC addresses.
Basic Firewall Settings
View or potentially adjust firewall security levels (often limited on ISP devices).
IPv6 Configuration
View or manage settings related to IPv6 connectivity if enabled by Converge.
Diagnostic Tools
May include basic ping or traceroute utilities for network troubleshooting.
VoIP Settings (if applicable)
Configuration related to voice services if provided through the same ONT.
Note: Converge often manages the firmware and may restrict access to some advanced settings. Features vary significantly by ONT manufacturer and model.
Explore Other Router Brands
Discover more router brands and their login details