Comfast WiFi Extender Router Login
Comfast produces various networking devices, including Wi-Fi range extenders (also called repeaters or boosters) designed to expand your existing Wi-Fi coverage. Setup involves connecting to the extender and configuring it via its web interface.
How to Login to Comfast WiFi Extender Router
Setting up your Comfast Wi-Fi extender involves linking it to your main router's Wi-Fi network to rebroadcast the signal. This is done through the extender's web-based setup wizard.
First, connect your computer or phone directly to the Comfast extender's own Wi-Fi network. The network name (SSID) is usually something like 'COMFAST...' or 'Wifi-...', often with no password required initially. Once connected, open a browser and navigate to the default IP address 192.168.10.1.
You'll be asked to log in. The standard default credentials for most Comfast extenders are username 'admin' and password 'admin'. After logging in, you'll typically be guided through a setup wizard to scan for and connect to your existing home Wi-Fi network.
- Plug in the Comfast extender near your main router for initial setup.
- Wait for the extender to boot up (check LED lights).
- Connect your computer or phone to the Comfast extender's default Wi-Fi network (SSID often like 'COMFAST_XXXX' or 'Wifi-XXXX'). The password might be blank initially, or check the manual/label.
- Open a web browser.
- Enter the Comfast extender's default IP address, which is typically 'http://192.168.10.1'.
- A login screen will appear. Enter the default username and password, commonly 'admin' for both.
- Click 'Login'.
Default IPs, username and password for Comfast WiFi Extender
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Comfast WiFi Extender | 192.168.10.1 | admin | admin | 85% |
| Comfast WiFi Extender | 192.168.1.1 | admin | admin | 98% |
Popular Router Models using Comfast WiFi Extender
| Model | IP | Username | Password |
|---|---|---|---|
| CF-WR750AC | 192.168.10.1 | admin | admin |
Troubleshooting Issues with Comfast WiFi Extender Router
Trouble setting up or logging into your Comfast extender?
- Check Power & LEDs: Ensure the extender is plugged in correctly and the status lights indicate it's ready for setup.
- Connect to Extender's Wi-Fi: Make sure your device (PC/phone) is connected to the 'COMFAST_...'/'Wifi-...' network, NOT your main home Wi-Fi.
- Confirm IP Address: Verify you are typing '192.168.10.1' correctly in the browser address bar (http:// prefix might help).
- Correct Credentials: Use 'admin' (lowercase) for both username and password. Check manual if this fails.
- Browser Issues: Clear cache/cookies, try an incognito window, or use a different browser.
- Physical Location: For initial setup, place the extender relatively close to the main router.
- Factory Reset: If you changed the password and forgot it, or if setup fails repeatedly, use the reset button. Find the small reset hole/button, plug in the extender, wait ~30 seconds, then press and hold the reset button for 10-15 seconds until lights flash/change. This restores factory defaults (IP 192.168.10.1, login 'admin'/'admin', default SSID). Restart the setup process.
Comfast WiFi Extender Router setup
After logging into the Comfast extender interface (192.168.10.1):
- Select Operating Mode: Choose 'Repeater' or 'Extender' mode (most common). Some models also offer AP or Router modes.
- Scan for Networks: The interface will scan for nearby Wi-Fi networks. Select your main home Wi-Fi network (SSID) from the list.
- Enter Home Wi-Fi Password: Carefully enter the password for your main home Wi-Fi network.
- Configure Extender's SSID: You can usually choose to keep the same SSID as your main router (adding '_EXT' or similar is often default/recommended to differentiate) or set a new name for the extended network. It's often recommended to use a different name initially to confirm connection.
- Apply/Save Settings: Confirm the settings. The extender will apply them and reboot.
- Relocate Extender: Once rebooted and configured, unplug the extender and move it to a location roughly halfway between your router and the area with weak Wi-Fi, ensuring it still gets a decent signal from the router (check LEDs).
- Connect Devices: Connect your devices to the extender's SSID (e.g., 'YourHomeWifi_EXT').
- Change Admin Password (Optional but Recommended): After setup, log back into 192.168.10.1 (you might need to connect to the extender's SSID again) and change the default 'admin' password under Administration/System settings for security.
Popular IPs for Comfast WiFi Extender
Frequently Asked Questions about Comfast WiFi Extender
What is Comfast WiFi Extender?
A Comfast WiFi Extender (or Repeater) is a device that picks up your existing Wi-Fi signal and rebroadcasts it to increase coverage area.
How to change Comfast WiFi Extender's WiFi Password or SSID?
This usually refers to the *extended* network password. You set this during setup to match your main router's password. To change the *admin* login password (for 192.168.10.1), log in and go to System/Admin settings.
What if I forget the Comfast WiFi Extender password?
Factory reset the extender (hold reset button 10-15 sec). Log in with 'admin'/'admin' at 192.168.10.1 and repeat the setup process.
Can I change Comfast WiFi Extender to another IP?
The extender's management IP (192.168.10.1) is usually static and might be changeable in LAN settings, but it's rarely necessary or recommended for repeater mode.
How to Protect Your WiFi Network Using Comfast WiFi Extender?
Secure your main Wi-Fi with WPA2/WPA3. Change the extender's default admin password ('admin'/'admin'). Keep firmware updated if possible (check Comfast website/interface).
How to reset your Comfast WiFi Extender login password?
Factory reset restores the extender to its out-of-box state: IP 192.168.10.1, login 'admin'/'admin', default SSID ('COMFAST_...'), requires full setup again.
What are the most common default logins for Comfast WiFi Extender?
Default IP: 192.168.10.1. Default username: 'admin'. Default password: 'admin'.
What is the most common default username for Comfast WiFi Extender?
The default username is 'admin'.
What is the default password for Comfast WiFi Extender?
The default password is 'admin'.
Advanced Comfast WiFi Extender Router Settings
Comfast extenders primarily focus on repeating signals, but might offer some basic settings:
Operating Mode Selection
Besides Repeater mode, some models support Access Point (AP) mode (connects via Ethernet to router, creates Wi-Fi) or Router mode (less common for extenders).
Wireless Settings Adjustment
Potentially change channel width or view basic wireless statistics.
System Status
View connection status to the main router, uptime, firmware version.
Firmware Upgrade
Option to manually upload a new firmware file downloaded from the Comfast support website.
LED Control
Some models allow turning off the status LEDs.
LAN Settings (Limited)
May show the assigned IP address (if dynamically assigned in AP mode) or allow changing the static management IP (use caution).
Note: Advanced features are generally limited on range extenders compared to full routers. The primary function is signal repetition configured through the setup wizard.
Explore Other Router Brands
Discover more router brands and their login details