Comfast Router Login
Comfast specializes in wireless networking products like routers, high-power access points, CPEs, and WiFi extenders. This guide helps you access the web configuration interface for Comfast devices.
How to Login to Comfast Router
Accessing your Comfast device's settings is key to configuring it for its intended purpose (router, AP, repeater, WISP, etc.). Management is done through its web-based interface.
The standard default IP address used by almost all Comfast networking devices is 192.168.10.1. Note the '.10.' segment, which is specific to Comfast.
Before attempting to log in, you must connect your computer directly to the Comfast device. For initial setup, an Ethernet cable connection is often preferred. Alternatively, connect wirelessly to the default WiFi network broadcast by the Comfast device; the SSID usually contains 'COMFAST' or may be generic like 'Wireless-N' or '5G-WiFi'. This default network might be open or use a simple default password like 'admin' or 'password' (check manual, though often open).
Once connected and you navigate to http://192.168.10.1, the login prompt will request credentials. The universal default for Comfast devices is:
- Username: admin
- Password: admin
You might be asked to select a language upon first login.
- Connect your computer to the Comfast device via Ethernet cable OR connect wirelessly to its default WiFi network (SSID often contains 'COMFAST' or 'Wireless-N').
- Open a web browser.
- Enter the default Comfast IP address: 'http://192.168.10.1'.
- The login screen should appear.
- Enter the default username: 'admin'.
- Enter the default password: 'admin'.
- Select the language if prompted (often English/Chinese).
- Click Login.
Default IPs, username and password for Comfast
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| Comfast | 192.168.10.1 | admin | admin | 85% |
| Comfast | 192.168.1.1 | admin | admin | 98% |
Popular Router Models using Comfast
| Model | IP | Username | Password |
|---|---|---|---|
| CF-WR617AC | 192.168.10.1 | admin | admin |
| CF-E3 | 192.168.10.1 | admin | admin |
Troubleshooting Issues with Comfast Router
Cannot access your Comfast device at 192.168.10.1? Check these points:
- Correct IP Address: Ensure you are typing 'http://192.168.10.1' exactly.
- Direct Connection: Verify you are connected directly to the Comfast device's LAN port via Ethernet, or to its *own* default WiFi network, NOT your main home network.
- Computer's IP: Ensure your computer has obtained an IP address in the 192.168.10.x range from the Comfast device (usually automatic via DHCP). If not, manually set your PC's IP to something like 192.168.10.100, subnet mask 255.255.255.0.
- Credentials: Confirm you are using 'admin'/'admin' (all lowercase). If you changed it, use the new password.
- Browser Issues: Clear browser cache/cookies, try incognito mode, or a different browser.
- Device Power/Status: Ensure the Comfast device is powered on and lights indicate normal operation (check manual).
- Factory Reset: If password is lost or device is unresponsive, use the reset button/pinhole. Press and hold for 10-15 seconds while powered on. This restores defaults (IP 192.168.10.1, login admin/admin, default WiFi/mode).
Comfast Router setup
After logging into the Comfast interface (admin/admin at 192.168.10.1):
- Select Operating Mode: Crucial step. Choose the mode based on your needs: Router, AP (Access Point), Repeater (Extender), WISP. The interface layout may change based on the selected mode.
- Run Wizard (if available): Some modes have setup wizards to guide configuration.
- Configure WAN/Internet (Router Mode): Set connection type (DHCP, Static IP, PPPoE) and enter ISP details if needed.
- Configure LAN Settings: Set the device's IP address if needed (usually keep 192.168.10.1 unless conflict). Configure DHCP server.
- Configure Wireless Settings: Set SSID (Network Name), Region, Channel, Security Mode (WPA2/WPA3 recommended), and WiFi Password for each band (2.4GHz/5GHz). Adjust transmit power if needed.
- Connect to Host Network (Repeater Mode): Scan for your main router's WiFi, select it, and enter its password.
- Change Admin Password: Go to System / Management / Password settings and change the default 'admin' password.
- Save/Apply Settings: Apply and save all changes. The device will likely reboot.
Comfast Router login in other languages
Popular IPs for Comfast
Frequently Asked Questions about Comfast
What is Comfast?
Comfast (Shenzhen Four Seas Global Link Network Technology Co.) manufactures wireless networking products like routers, APs, CPEs, extenders, often focused on range and performance.
How to change Comfast's WiFi Password or SSID?
WiFi password is set in Wireless Settings / Wireless Security. The admin login password ('admin') is changed in System Tools / Management / Modify Password.
What if I forget the Comfast password?
Factory reset the device (hold reset button 10-15s). This restores the 'admin'/'admin' login.
Can I change Comfast to another IP?
The device's LAN IP (default 192.168.10.1) can be changed in Network / LAN Settings.
How to Protect Your WiFi Network Using Comfast?
Change the default 'admin' password. Use WPA2/WPA3 security with a strong password for WiFi networks.
How to reset your Comfast login password?
Resetting restores factory defaults: IP 192.168.10.1, login 'admin'/'admin', default operating mode, default WiFi settings.
What are the most common default logins for Comfast?
Default IP: http://192.168.10.1. Default Username: 'admin'. Default Password: 'admin'.
What is the most common default username for Comfast?
'admin'
What is the default password for Comfast?
'admin'
Advanced Comfast Router Settings
Comfast devices often offer features geared towards flexible wireless deployment:
Multiple Operating Modes
Frequently support Router, Access Point (AP), Repeater/Extender, WISP (Wireless ISP), and sometimes Bridge modes.
High Power / Long Range
Many models are marketed with high transmit power and external antennas for extended range.
Outdoor CPE Models
Specific devices designed for outdoor Point-to-Point (PtP) or Point-to-Multipoint (PtMP) links.
Adjustable Transmit Power
Allows tuning the WiFi signal strength.
Multiple SSIDs
Ability to broadcast several different WiFi network names, sometimes with VLAN tagging (more common on APs).
Wireless Access Control
MAC address filtering to allow or deny specific devices.
System Status & Logs
Monitoring tools for traffic, connections, and system events.
Firmware Updates
Option to upload new firmware files downloaded from Comfast support.
Note: The user interface can sometimes be less polished than mainstream consumer brands, and feature availability depends heavily on the specific Comfast model.
Explore Other Router Brands
Discover more router brands and their login details