192.168.1.64
192.168.1.64 is a private IP address within the common 192.168.1.x range. It might be assigned to a router, network printer, camera, or another device on your LAN. This guide helps you connect to its management interface.
How to Login to 192.168.1.64
Trying to configure a device at 192.168.1.64? This local IP address serves as the access point for managing the settings of a specific piece of network equipment. It could be your primary router, but it's often assigned to other devices like range extenders or IP cameras.
To access it, your computer or mobile device must be on the same network, specifically the 192.168.1.x subnet. Connecting via an Ethernet cable can sometimes be more reliable than WiFi, especially for initial setup or troubleshooting.
Ensure you are using a compatible web browser like Chrome, Safari, Firefox, or Edge.
If 192.168.1.64 is not the default IP for your device, it might have been assigned dynamically by your router or set manually.
- Connect your computer/phone to the same network as the 192.168.1.64 device.
- Open a web browser.
- In the address bar, type 'http://192.168.1.64' and hit Enter.
- A login screen should appear. Enter the username and password for the device.
- Click 'Login' to enter the configuration area.
Default username and password for 192.168.1.64
| Router Brand | IP | Username | Password | Confidence |
|---|---|---|---|---|
| TP-Link | 192.168.1.64 | admin | admin | 98% |
| Netgear | 192.168.1.64 | admin | password | 95% |
Troubleshooting Issues with 192.168.1.64
Can't connect to 192.168.1.64? Try these steps:
- Check Power & Connection: Ensure the device is powered on and properly connected to the network. Verify network cable connections if using Ethernet.
- IP Address Check: Confirm 192.168.1.64 is the correct IP. Check the device label/manual or use network scanning tools to find devices on your network.
- Subnet Mismatch: Ensure your computer's IP address is in the same range (e.g., 192.168.1.x). If your computer has an IP like 192.168.0.x, you won't be able to reach 192.168.1.64 directly.
- Browser Issues: Clear the cache/cookies in your browser or try an incognito/private browsing session.
- Firewall Block: Security software on your computer might be blocking access. Try temporarily disabling it for testing.
- Duplicate IP: Ensure no other device on your network is using the same 192.168.1.64 address.
- Device Reset Needed: If you've forgotten login details or the device is unresponsive, consider a factory reset (check manual for procedure).
Common Misspellings of 192.168.1.64
Be careful when typing the IP address. These are common misspellings that won't work:
192.168.l.64
192.l68.1.64
l92.168.1.64
l92.l68.1.64
192.l68.l.64
l92.168.l.64
l92.l68.l.64
192.168.1.64
Configure your router with 192.168.1.64
Once you've successfully logged into the 192.168.1.64 interface, consider these setup actions:
- Secure Login: Change the default administrative password immediately. Use a strong, unique password.
- Configure Network Role: Set up the device according to its purpose (e.g., access point mode, repeater mode, standard router functions).
- Wireless Settings (if applicable): Configure SSID (network name), security (WPA2/WPA3), and password for WiFi.
- Update Firmware: Check for and install any available firmware updates for better performance and security.
- Adjust Time Zone: Ensure the device's time zone is set correctly for accurate logs and scheduling.
- Enable/Disable Services: Turn off any unnecessary features (like UPnP if not needed) to reduce the attack surface.
- Save Settings: Remember to save your configuration changes before logging out or rebooting.
192-168-1-64 login in other languages
Popular router brands for 192.168.1.64
Frequently Asked Questions about 192.168.1.64
What is 192.168.1.64?
192.168.1.64 is a private IPv4 address used within a local area network (LAN) for a specific device, often assigned dynamically or manually.
How to change router's WiFi Password or SSID of 192.168.1.64?
Log in, then navigate to sections like 'Administration', 'System', 'Security', or 'Management' to find the password change option.
What if I forget the 192.168.1.64 password?
Perform a factory reset using the device's reset button. This reverts all settings, including the password, to defaults.
Can I change 192.168.1.64 to another IP?
Yes, usually possible in the 'LAN Settings' or 'Network Configuration' section of the admin panel.
How to Protect Your WiFi Network Using 192.168.1.64?
Change default login, use strong WiFi encryption (WPA3/WPA2), keep firmware updated, and disable remote management if not needed.
How to reset your router?
Find the reset button (often recessed), press and hold it for 10-15 seconds with the device powered on.
How do I know if my router uses 192.168.1.64?
Look for a sticker on the device, consult the manual, or use a network scanning tool on your computer/phone.
Do I need internet to access 192.168.1.64?
No, accessing a local IP like 192.168.1.64 doesn't require an active internet connection.
Why can't I access 192.168.1.64?
Reasons include incorrect IP, not being on the same network segment, firewall blocking, or browser problems.
What are the most common default logins for 192.168.1.64?
Try combinations like admin/admin, admin/password, user/user, or check the device documentation.
What is the most common default username for 192.168.1.64?
'admin' is very common, but 'user' or specific brand defaults exist.
What are the most common default passwords for 192.168.1.64?
'admin', 'password', or blank are frequent defaults.
What are common misspellings of 192.168.1.64?
Be careful not to type 192.168.l.64 or similar errors.
Advanced Settings for 192.168.1.64
Depending on the device type accessible at 192.168.1.64, you might find these advanced options:
VLAN Configuration
Segment your network into virtual LANs for better organization and security (usually on managed switches or advanced routers).
QoS (Quality of Service)
Prioritize network traffic for specific devices or applications (e.g., gaming, video calls).
Static Routing
Manually define routes for network traffic, useful in complex network setups.
Firewall Rules
Configure specific inbound and outbound firewall rules for granular control (if it's a router/firewall device).
VPN Client/Server
Some devices can act as a VPN client to connect to a remote network or as a VPN server for remote access.
System Monitoring
View detailed statistics on CPU load, memory usage, and network traffic.
Remote Management
Configure access to the management interface from outside your local network (use with extreme caution and secure passwords).
Reminder: Incorrectly configuring advanced settings can negatively impact your network. Always understand the implications or consult documentation before applying changes.
Explore Other Router IP Addresses
Discover more router IP addresses and their login details